H222500100435
H222500100435
Manufactured by
DYNAPAR
Description
- H222500100435
- INCREMENTAL ENCODER
- SHAFTED ENCODER
- SERIES H20
- BIDIRECTIONAL
- 2500 PPR
- FLANGE MOUNT
- 3/8″ DIAMETER SHAFT W FLAT
- NO FACE MOUNT
- 0.69″ DIA MALE PILOT WITH SHAFT SEAL
- 5-26V IN
- 5V LINE DRIVER OUT
- 10 PIN CONN
- SIDE MOUNT
- For repair please contact us at (888) 932-9183 or (905) 829-2505
Specifications
| Part # | H222500100435 |
|---|---|
| Category | Sensors & Switches |
| Subcategory | Encoder/Resolver |
| Code | Incremental, Optical |
| Disk Material | Glass or plastic (PPR Dependant) |
| Electrical Immunity | Reverse polarity and short circuit protected |
| Extended Operating Temperature | 0 to +85 °C |
| Format | Two channel quadrature (AB) with optional Index (Z) and complementary outputs |
| Frequency Response | 100 kHz min. (index 75 kHz min. for extended temperature range) |
| Housing and Cover | Aluminum |
| Humidity | Up to 98% (non-condensing) |
| Index | 180° ± 18° electrical (gated with B low) |
| Moment of Inertia | 3.0 x 10-4 oz–in–sec2 |
| Noise Immunity | Tested to EN61326-1 |
| Phase Sense | A leads B for CCW shaft rotation as viewed from the shaft end of the encoder Quadrature Phasing: 90° ± 22.5° electrical |
| Shaft Material | Stainless Steel |
| Shock | 50 G’s for 11 milliseconds duration |
| Standard Operating Temperature | 0 to +70 °C; |
| Storage Temperature | –40 to +90 °C |
| Symmetry | 180° ± 18° electrical |
| Vibration | 5 to 2000 Hz at 20 G’s |
| Waveforms | Squarewave with rise and fall timesless than 1 microsecond into a load capacitance of 1000 pf |
New Product with Accu’s 1-year warranty
Call (905) 829-2505 for lead time
Note: Price is Canadian Dollars
LIMITED STOCK
Order Now!
Choosing to REPAIR your product can save you money and help reduce waste. Our expert technicians will ensure your product works like new!
Buy Now or Request Repair via below form or Call us @ 1-888-932-9183
Procedure for sending in a Repair
- As we receive your shipment, we assign an RMA tracking number
- After doing a thorough inspection we give the estimate on cause of failure, what’s required to get it back up and running, and quote you the repair
- After repair and reassembly the lead technician will adjust the alignment angle and run-test the motor on the original OEM drive, not a standalone universal drive as our competitors. This ensures the motor works exactly how it would in your system. Our vast investment in harnesses and drives makes this process quick, safe, and cost-effective for you to get your machine back online fast.
- Once completed the motor is packed, with foam in a secured box for shipping, and customer is sent the tracking number.
